Filter
Top Products
^ Hang the furniture door onto
adjusting bolts h.
^ Loosely attach nuts c on the
adjusting bolts.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning adjusting
bolts h with a screwdriver.
^
Tighten nuts c.
Securing the appliance doors to the
furniture doors:
^ Drill fixing holes a in the furniture
doors and screw in the4x14mm
screws b.
Make sure the two metal edges are
alligned (Symbol II).
– Align depth Z on the furniture door:
Loosen screws c at the top of the
appliance door, and loosen the
hexagon-headed screw d at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
doors and the front edge of the
housing unit.
Building in the appliance
55