Filter
Top Products
^ Close both of the doors, and align
them with the neighbouring furniture
doors.
^ Whilst counterholding adjusting bolts
g with a screwdriver, tighten nuts e
on the appliance doors with ring
spanner f.
^
Cover strip h must be completely
hidden in the niche, and must not
protrude.
^
Tighten all screws again.
^ Replace top cover i, and snap it
into place.
^ Replace side covers j, making sure
they snap into place.
^ Replace side covers k, making sure
they snap into place.
To make sure the appliance is
correctly fitted:
–
The doors must close properly.
–
The doors must not touch the
housing unit.
–
The seals at the top edge of the
handle side must fit properly.
^
To double check place a torch in the
appliance and close the doors. Turn
the lights out in the room. If you can
see any light shining out from the
sides double check the installation.
Building in the appliance
56