Filter
Top Products
^
Break off the protruding end of
bottom cover e. It is no longer
required.
^
Fit angled cover g onto bottom fixing
bracket c.
^
Close the appliance doors.
Fitting the furniture doors
^
A gap of 8 mm a must be set
between the appliance door and the
central fixing bracket.
^
Push fitting aids b up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see - on
the diagram).
^
Undo nuts c and take fixing bracket
d off together with the fitting aids.
^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang fixing bracket d with the fitting
aids onto the inside of the furniture
door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short4x14mm
chipboard screws e. (On cassette
doors only use 4 screws on the
edges).
^
Pull the fitting aids upwards to
remove them f.
^
Turn them around and fit them into
the middle slots on fixing bracket g
for safe keeping.
Building in the appliance
54