Filter
Top Products
^
Open both appliance doors.
^ Using a screwdriver, remove cover
g from the top corner of the
appliance.
^
Fit cover h onto fixing bracket i.
^
Secure fixing bracket i to the top of
the appliance with screws j
(M5 x 15).
^ Fit cover k onto fixing bracket l.
^ Secure fixing bracket l to the
bottom of the appliance with screws
m (M5 x 15).
^ Carefully remove the protective foil
from sealing strip n.
^ Apply the sealing strip to the side of
the appliance on which the door is
opened so that it is flush with the
front edge of the appliance.
Fit the sealing strip so that it meets
up with the lower edge of top cover
h and then cut the sealing strip
2-3mmabove bottom fixing bracket
l.
^
Push the appliance into the niche
until covers h and k touch the front
edge of the side walls of the housing
unit.
Building in the appliance
51