Filter
Top Products
Preparing the appliance
^
Slide cover strip a into the holder as
shown, with the bumps facing
downwards. The bumps will fit into
keyhole slots b.
^ Position the mains electricity cable so
that the appliance can be connected
easily once installed.
^
Secure fixing brackets c (supplied)
to the appliance doors by screwing a
hexagon screw d into the pre-drilled
holes.
(With large furniture doors, attach a
third pair of fixing brackets c in the
handle region of the doors).
^
Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
With 16 mm thick unit walls:
^ Clip spacers e onto the top hinges
and spacers f onto the bottom
hinges.
Building in the appliance
50