Filter
Top Products
Before using for the first time
22
Basic settings
Switch the dishwasher on with the
butt
on.
The welcome screen will appear when
the dishwasher is switched on for the
first time.
Language
The display will then change automati‐
call
y to the screen for setting the lan‐
guage.
Use the arr
ow buttons to select
the language you want and also the
country, if appropriate, and confirm
your selection with OK.
See "Display / Settings menu" for
mor
e information about the display
and controls.
A tick will appear ne
xt to the lan‐
guage that has been set.
Time of day
The display will then change to the
scr
een for setting the time.
The time of day needs to be set before
the "Fle
xiTimer" programme option can
be used.
You can also show the current time of
day in the display.
Use the arr
ow buttons to set the
hour and confirm with OK.
T
hen set the minutes and confirm
with OK.
Keeping the arr
ow buttons press‐
ed in, will increase and decrease the
time automatically.
The display will then change to the
scr
een for setting the clock display.
Select whether or not the time of day
should show in the display and con‐
firm your selection with OK.
If you have sel
ected Display On, con‐
firm the message about higher ener‐
gy consumption with OK.