Filter
Top Products
Guide to the appliance
8
Display
General
The display is used to select or set the
following:
– the programme
– the FlexiTimer (Delay start)
– the Settings menu
The display can show the following:
– the current time of day
– the stage the programme is at
– the estimated time left for the pro‐
gr
amme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and in‐
formation
To save energy, the dishwasher
switches off aft
er a few minutes if you
do not press any buttons during this
time.
To switch the dishwasher back on
again, press the button.
Settings menu
The Settings menu is used to alter the
d
ishwasher's electronics to suit differ‐
ent requirements. You access the Set‐
tings menu by pressing a specific but‐
ton combination (see "Settings menu").
The arrows in the display indicate fur‐
the
r options. You can use the ar‐
row buttons underneath the display, as
appropriate, to select these further op‐
tions.
The OK
button is used to confirm a
message or setting and also to move to
the next menu or another level.
A tick will
appear next to the option
which is currently selected.
To exit a sub-menu, use the arr
ow
buttons to select the Back option in
the display and confirm your selection
with OK.
If you do not press any of the buttons
for several seconds, the display with re‐
turn to the previous level. You may
need to enter your settings again.