Problem solving guide
64
Most minor faults in the performance of the appliance, some of which may result
fr
om incorrect operation, can be put right without contacting the Service Depart‐
ment.
The following guide may help you to find the reason for a fault, and to correct it.
Y
ou should, however, note the following:
Unautho
rised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances should only be carried out by a suitably
qual
ified and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.
Technical problems
Problem Cause and remedy
The display remains
dark and the S
tart indi‐
cator light is not flash‐
ing after the dishwasher
has been switched on
with the button.
The appliance is not plugged in.
Inser
t the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip sw
itch in the mains fuse box or re‐
place the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher stops
durin
g a programme.
The mains fuse has tripped.
Reset the trip sw
itch in the mains fuse box or re‐
place the fuse in the plug (minimum fuse rating -
see data plate).
If the mains fuse trips again, call the Miele Service
Department.