Miele 09 645 470 Dishwasher User Manual


 
Programme options
50
FlexiTimer with EcoStart
The FlexiTimer gives you thr
ee ways
of starting the programme by means of
delaying the start. You can set the start
time or the finish time of a programme.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the EcoStart function.
When using the FlexiTimer, make
sur
e that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth if necessary. If the
compartment is wet, powder deter‐
gent can become lumpy and stick to
the dispenser, with the result that it
is not fully dispensed.
Do not use liquid detergent as it can
run into the dishwasher before it is
required.
T
o prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until
just before starting the pro‐
gramme, i.e. before you activate the
FlexiTimer with OK. Also activate the
door safety lock.
Switch on the dishwasher with the
butt
on.
The S
tart indicator light will flash.
Selec
t the programme you want.
P
ress the button.
You can use the  arr
ow buttons to
select the Start at, Finish at, or EcoStart
function or Back .
Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be highligh‐
t
ed.
You can now enter the time you want
using the  arr
ow buttons and con‐
firm with OK.
If, while you are setting the time, you do
not pr
ess any buttons for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If the time of day (clock) display has
been switched off (see "Settings
menu, T
ime of day") the display will
go out after a few minutes and only
the Start indicator light will flash slow‐
ly.
Press any button to switch the display
back on aga
in for a few minutes.