Filter
Top Products
Operation
44
Switching on
Ma
ke sure the spray arms can rotate
freely.
Cl
ose the door.
Open
the stopcock, if it is closed.
P
ress the button for at least 2 sec‐
onds.
The programme selected will appear
b
riefly in the display and the appropri‐
ate indicator light will come on.
Then, if applicable, the estimated ener‐
gy and water consumption for the pro‐
gramme selected will appear for a few
seconds.
Finally, the display will show the esti‐
mated programme duration for the pro‐
gramme selected.
Switch the Memory function on (see
"Settin
gs menu, Memory") if you want
the last programme selected to remain
selected instead of the ECO pro‐
gramme.
Selecting a programme
Choose your programme according to
the type of load and how d
irty it is.
The different programmes and their
uses ar
e described in the Programme
chart later on in this booklet.
Use the pr
ogramme selector button
to select the programme required.
The indicator light next to the pro‐
gr
amme selected will come on.
Further programmes are selected via
the F
urther option.
Use the pr
ogramme selector button
to select the Further option.
The first of the further programmes will
appear in the display
.
Use the arr
ow buttons to select
the programme required.
During the course of the programme
you can use OK to display the name
of the programme which is currently
running.
You can now select programme options
(see "Programme options").
If any programme options are selected,
the appr
opriate indicator lights will also
light up.