Filter
Top Products
Problem solving guide
65
Problem Cause and remedy
One of the following
fault messages appears
in the display:
Before rectifying the problem:
Switch the dishwasher off with the butt
on.
Fault FXX There may be a technical fault.
After a few seconds:
Switch the dishwasher back on.
Selec
t the programme you want.
P
ress the Start button.
If the fault message appears again, there is a techni‐
cal fault.
C
all the Miele Service Department.
Waterproof The Waterproof system has reacted.
C
lose the stopcock.
C
all the Miele Service Department.
Fault F78 A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the butt
on.
Switch the dishwasher back on.
Selec
t the programme you want.
P
ress the Start button.
If the fault message appears again, there is a techni‐
cal fault.
C
all the Miele Service Department.