Filter
Top Products
Minute + (programmable)
Pressing the "Start /c" button is
sufficient to start the appliance
operating at maximum power.
Three cooking times are stored in the
memory:
^
30 sec: Press "Start /c" once
^
1 min: Press "Start /c" twice
^
2 min: Press "Start /c" three times
Pressing "Start /c" four times in a row
will return you to the first saved time,
etc.
The cooking time can be increased
during operation by pressing the "Start"
button. Each time the "Start" button is
pressed, the duration is increased by
another 30 seconds.
Reprogramming saved times
You can change the saved cooking
times.
^
Use the "Start /c" button to select the
time you wish to reprogram (press
once, twice or three times) and hold
the "Start /c" button.
^
While holding the "Start" button,
change the time using the selector
knob (max. 15 minutes).
The modified program will run when
the "Start /c" button is released.
If there is a loss of power, the
reprogrammed times will no longer
be saved and must be reset.
System lock
The system lock prevents unauthorized
operation of the appliance.
To activate the system lock
^
Press and hold the "Stop/C" button
until an signal sounds and the key
symbol appears in the display:
The key symbol will go out after a short
time.
The key symbol will reappear whenever
a button is pressed or a selector is
turned.
If there is a power outage, the
system lock will need to be
reactivated.
To deactivate the system lock
^
If you would like to deactivate the
system lock, press and hold the
"Stop/C" button again until an signal
sounds.
Operation
29