Filter
Top Products
^
Fit a screw a in to the center of the
first long hole.
^
Check the alignment of the unit, then
fit another screw a into the other
long hole.
^
Tighten both screws.
^
Place the appliance in the niche.
Using both hands on the back of the
microwave interior move it into place.
The microwave will engage into
position once it is correctly installed.
^
Check the alignment.
^ If it is not aligned correctly, pull the
appliance out of the niche and
realign it by slightly adjusting the
bracket on the long holes.
^ Once correctly aligned, to prevent
the unit from moving insert a third
screw a into the middle of the
bracket.
^
Slide the unit into the niche, pulling
the plug and cable through the back.
^ Connect the electrical supply.
^ Push the appliance all the way in to
the niche as described above.
Installation
56