Filter
Top Products
One favorite program can be saved into
memory. This program can be used for
your most frequently cooked recipe.
The program can have up to 3 stages
(for example: 2 minutes at 600 W,
followed by 10 minutes at 450 W, and
finally 3 minutes at 300 W).
Programming
(The example given is for a three-stage
program.)
^
First, select the power level for the
first stage.
^ Then, select the duration.
^ Press the "M" button.
"1" will appear in the display, and "2"
will flash.
^
Next, select the second power level
and duration.
^
Press the "M" button again.
"2" will appear in the display, and "3"
will flash.
^
Now, select the third power level and
duration and press the "M" button.
After the third step, you can use the "M"
button to scroll through your entry and
check it.
^
Once you have finished
programming, turn the power
selector to the 12 o'clock position.
^
Start the program to save the entry.
Do not run the entire program unless
there is food in the appliance.
If there is no food in the appliance,
press the Stop/C button twice as
soon as you have started the
program to prevent the appliance
from being damaged.
One- and two-stage programs can be
saved in the same way. The
programming process is completed by
moving the power selector to the 12
o'clock position and then pressing the
Start button. Pressing the M button
shows the next stage.
Changing an entry
^
You can override the previously
saved program by entering a new
program.
Saving your favorite programs
40