Filter
Top Products
Some of the appliance's factory default
settings can be changed if desired.
See the chart on the following page for
the different options available.
The original factory settings are marked
in the chart with a star*.
To change a setting, proceed as
follows:
^ Press and hold the m and "M"
buttons at the same time until PIand
X appear in the display. Then
release them. If you press them for
too long, the time of day will appear
again in the display.
^ Use the selector knob to choose the
setting that you wish to change (PI
to P5and P0). Turn it until the
desired setting shows in the display.
^
Then, press the "M" button to call up
the setting.
S will appear in the display to show
that the setting can be changed.
^
Turn the selector knob if you wish to
change the setting (see table) and
confirm your entry by pressing the M
button (for P5and P0, press and
hold the "M" button for approx.
4 seconds).
The change is then saved to the
memory. P will appear in the display
again, together with the number for the
setting.
The other settings can be changed in
the same way.
^
When you have finished making the
desired changes, press the "Stop/C"
button.
Changes to the settings remain
saved during a power outage.
Changing settings
42