Filter
Top Products
Operation
45
Starting the programme
S
tart the programme by closing the
door.
The programme will begin.
The In-operation indicator light comes
o
n to show that a programme has been
started.
A programme can only be cancelled
in the first few
minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Display
The estimated duration of the pro‐
gr
amme selected appears in hours and
minutes in the display before the pro‐
gramme begins. During the programme,
the time left until the end of the pro‐
gramme is displayed.
Symbols appear to indicate which
stag
e the programme is at:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The programme duration displayed may
var
y with the same programme. It is in‐
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of deter‐
gent, the amount of crockery and how
dirty it is.
When a programme is selected for the
first time, the display shows an aver
age
duration for a cold water intake.
The durations shown in the Programme
char
t refer to standard test loads and
temperatures.
Each time a programme is run, the
elec
tronic unit takes the new conditions
into account, and calculates the pro‐
gramme duration required.