Filter
Top Products
Operation
46
Energy management
To save energy, the dishwasher will
switch off aut
omatically 10 minutes af‐
ter the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Settings menu,
Optimise standby").
P
ress the button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a pr
ogramme or the FlexiTimer
is running or if there is a fault.
At the end of a programme
At the end of a programme, the In-op‐
er
ation indicator light will be visible
flashing slowly with the door shut. The
buzzer might also be sounding.
The programme has finished when
Finished
appears in the display and the
door has opened slightly (if applicable).
If the Consumption pr
ogrammable func‐
tion is switched on, you can now call up
the actual energy and water consump‐
tion of the programme which has just
finished (see "Caring for the environ‐
ment, EcoFeedback consumption indi‐
cator").
The drying fan may continue to run for
a few minut
es at the end of the pro‐
gramme.
Open the door complet
ely to re-en‐
gage the door closing mechanism.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10 min
utes after the end of the pro‐
gramme if the door is closed.
If you have deactivat
ed the auto‐
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
workt
op because the fan is no longer
running.