Filter
Top Products
Cleaning and care
61
Checking the filters in the
wash cabinet
The filter combination in the base of the
wash cabinet r
etains coarse soil from
the suds solution, preventing it access‐
ing the circulation system and re-enter‐
ing the cabinet through the spray arms.
This dishwasher must not be
u
sed without all the filters in place.
Collection of coarse soil may cause the
filt
ers to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on use.
The message Check filters will appear in
the d
isplay after every 50 programme
cycles (factory default setting).
You can set the interval for this mes‐
sage t
o appear to between 30 and 60
programme cycles (see "Settings menu,
Check filters").
Check the filt
er combination.
Clean it, if necessa
ry.
Then confirm the message with OK.
The message will go out.
Cleaning the filters
Switch the dishwasher off.
T
urn the handle anti-clockwise to re‐
lease the filter combination .
Lift the filt
er combination out of the
dishwasher . Remove any coarse
particles and rinse the filter well un‐
der running water.
Use a nylon brush if necessary.
Mak
e sure that when cleaning
the filters, no coarse soil falls into the
circulation system, causing a block‐
age.