Filter
Top Products
Important: the water piping must be
rinsed through every day and the
machine cleaned thoroughly before
the first drink of the day is prepared.
Rinsing will take place automatically
if the Rinsing programme option has
been set to "On" and the machine is
cold. Hot water will run out of the
spout into the drip tray once the
machine has heated up.
If the Rinsing programme option has
been set to "Off", select "Rinsing" in
the display to rinse out the system
(see "Cleaning and care").
Switching on
^ Touch the On/Off sensor s.
The following message will then
appear:
Heating-up phase
If the automatic Rinsing programme
option has been set to "On" (factory
default setting), the following will
appear after the machine has heated
up:
Rinsing
Water will run out of the spout.
You will hear the capsule carousel
moving into position.
The main menu will then appear in the
display:
COSI o Espresso
K1 K2 K3 K 4 K5 L onG k C
Before preparing the first drink
Filling the system with water
The machine is emptied completely
before it leaves the factory. You must
allow water to be pumped through the
system before the first drink of coffee or
hot water is prepared.
Hot water
K1 K2 K3 K 4 K5 L o n G k C
^
Select "Hot water" with one of the
arrow sensors.
^
Touch the OK sensor.
^ Run some hot water into the cup.
^ Touch the OK sensor again to switch
the water off.
The system is now filled with water, and
the machine is ready to use.
Preparing espresso and coffee
^ Place a cup under the spout.
COSI o Espresso
K1 K2 K3 K 4 K5 L on G k C
^
Select the type of coffee with one of
the arrow sensors.
^
Use the drink selection sensor to
select espresso or coffee.
The type of coffee you have chosen
will appear in the top line of the
display on the right.
Making drinks
17