Filter
Top Products
Programming the amount via
"Settings"
^
Place the appropriate cup for the
amount you want to programme
under the coffee spout.
^
Select "Settings F" from the Main
menu, and then touch the OK sensor.
Both coffee and espresso will appear in
the display. You can set the quantity of
water dispensed for both these drinks.
^
Select the type of drink (coffee or
espresso) with the arrow sensors and
touch the OK sensor.
^ Now select the type of coffee you
want to drink just now and touch the
OK sensor. (If the OK sensor does
not react, the chamber for the type of
coffee is empty).
^ Select "Start".
^ When the cup is filled to the level you
want, touch the OK sensor.
The portion size for this particular drink
is now set and stored in memory. The
volume of water programmed in will
now be dispensed every time this drink
(coffee or espresso) is selected,
regardless of the type of coffee
chamber selected.
Setting portion sizes for different
User profiles
In addition to the standard
user profile you can also set
specific portion sizes for the
nine other user profiles.
^
Use the arrow sensors to select "User
profile" and then touch the OK
sensor.
^
Select "Select" with the arrow sensors
and touch the OK sensor.
^
Use the arrow sensors to select the
name of the user profile for which you
want to set the portion size and touch
the OK sensor.
A number will appear in the
top line of the display beside
the user profile symbol n to
show that a user profile has been
selected.
Proceed now as described at the
beginning of the section.
All settings and water quantities will
now apply for that user.
Programming the amount (Setting the portion sizes)
38