Filter
Top Products
Cappuccinatore (milk frother)
The cappuccinatore can be dismantled
into several parts to clean it properly. It
is very important to clean the parts
thoroughly as otherwise the froth will
not be produced properly, if at all. It is
best to clean the cappuccinatore in a
dishwasher - all parts are dishwasher-
safe.
^
Dismantle the cappuccinatore lid and
clean all the parts.
You will not be able to pull the valve
out if the dot is set between the
symbols for hot milk and steam.
^ Reassemble the parts of the lid as
shown. In order to insert the valve
correctly the dot on the valve must be
at the top right-hand side.
Ensure that all parts have been
reassembled correctly and that
there is no gap between the two
parts of the lid.
Also make sure that the
reassembled lid is fitted onto the
cappuccinatore jug correctly. The
valve sits above the cappuccinatore
handle. If this is not the case, the
cappuccinatore will not operate
properly.
Cleaning and care
48