Filter
Top Products
Resetting the factory default
settings
The "factory default" setting is used to
reset the various settings back to the
default status.
You can then select whether you want
to reset All settings back to the factory
default settings (Timer, Automatic
rinsing, Steam system, Lighting, System
lock, Water hardness, Display, the most
recently selected type of coffee and all
the Standard User profile settings), or
to delete the User profiles.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
^ Use an arrow sensor to highlight
"Factory default", and then touch the
OK sensor.
Various options will then be available:
All settings
This option sets "All settings" back to
the factory default.
^
Select "Reset" under "All settings",
and touch the OK sensor.
All settings are then reset to the default.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.
Factory default settings (the coffee
machine is delivered with the
following settings)
–
Temperatures for coffee and hot
water (medium settings for both)
–
Automatic rinsing and Steam system
(both set to "On")
–
Time of day display (On for 60
seconds),
Clock format (24 h),
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
Timer - Switch off at (12:00),
(Switch on at and Switch off at are
both deactivated)
– Lighting: Brightness (medium)
– Safety: System lock (Off)
– Water hardness (Very hard 4)
– Display: Display - Contrast (medium),
Brightness (maximum)
– Volume: Volume of buzzer tones and
keypad tone (maximum setting for
both)
–
User profile: Revert (when switched
on).
–
Allocate type (of coffee):
Chamber 1 = Volluto
Chamber 2 = Arpeggio
Chamber 3 = Cosi
Chamber 4 = Roma
Chamber 5 = Decaffeinato
Settings: Customising your machine
32