Filter
Top Products
User profile drinks
With User profiles, you can create
drinks to suit your personal taste and
those of your guests.
If you have set the machine up for a
specific user profile you must first
select the user profile required and
then the type of drink.
User profile
K1 K2 K3 K 4 K5 L o n G k C
^
Select "User profile" with one of the
arrow sensors.
^ Touch the OK sensor.
^ Select "Select" with the arrow sensors
and touch the OK sensor.
^ Select the user profile you want with
one of the arrow sensors and touch
the OK sensor.
A number will appear in the
top line of the display beside
the user profile symbol n to
show that a user profile has been
selected.
This function operates in the same
way as a standard profile.
After use
Before switching the
machine off for any length of
time, the pipework, brew
system, spouts and steam valve need
to be cleaned.
If you have switched the automatic
rinsing function off, you will need to
rinse the system through manually.
Place a suitable container under the
spout and the steam valve.
The display will let you know the current
status of the machine or what action
needs to be taken.
Rinse
K1 K2 K3 K 4 K5 L on G k C
^ Select "Rinse" with one of the arrow
sensors.
^ Touch the OK sensor.
Water will run out of the spout.
^ Open the steam valve.
Water will run out of the steam valve.
^
Close the steam valve a few seconds
later.
The system has now been flushed
through and the machine can be
switched off.
Making drinks
22