Filter
Top Products
Changing a program
If the selected program has not yet
been started:
^
Turn the program selector to the new
program.
^
Select the "Drying" feature, if
necessary.
^
Press the "Start" button.
Program sequence display
The current step of a wash program is
indicated by a program sequence
display.
At the end of a program
When the "Complete" indicator
illuminates, the "Start" indicator goes
out and the display shows a "0", the
program has ended. A buzzer will
sound for 30 seconds. (The buzzer
function can be changed; see
"Programming special functions.")
Turning off
^
Press in and release the "On/Off"
button to turn the machine off.
Canceling a program
Once a program is running, it should
only be canceled in extreme cases,
e.g. when glassware is knocking
against each other and has to be
rearranged.
^
Turn the program selector to "Stop".
The program is canceled after
2 seconds.
^
Open the door with the "Door" button.
Caution! Water and items in the
machine may be hot. Danger of
burning or scalding.
^ Rearrange or remove the items (wear
protective gloves where necessary.)
^ Replenish powdered detergent if
necessary.
^ Close the door.
^ Select the "Drain" program to allow
the waste water to drain.
^
Select and start the program.
Operation
26