Note
–
Unoccupied program selector
positions are displayed by a bar (-)
in the middle display element.
–
The programming level can be
scanned if the selector is in the
"Stop" f position.
1. Selecting a second interim
rinse
A second interim rinse can be
programmed to improve interim rinsing
in all programs (except "Rinse").
^
Turn the program selector to "STOP"
f.
^
Turn the machine off.
^
Press and hold "Display" and "Start".
At the same time, turn the machine
on with the "On/Off" button..
The displays shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^ Press the "Drying" button once. "E01"
appears in the display.
^ Turn the program selector to the
5-o’clock position.
The display shows either "50" or "51".
"50" = without Interim rinse II.
"51" = with Interim rinse II.
^ Press "Display" to change from "50" to
"51" or vice versa.
^
Press the "Start" button. "SP" appears
in the display.
^
Press the "Start" button again. The
change has been saved.
^
Please note the changed setting:
Programming special functions
28