Filter
Top Products
Loading the dishwasher
35
Cutlery
3D cutlery tray (depending on model)
See "Loading the dishwasher /
Loading examples" for examples of
how to load crockery and cutlery.
Arrange the cutlery in the tray as
shown.
To make unloading much easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by items which are too big
(e.g. cake slices).
The side sections of the tray can be
moved into the middle to accommodate
tall items of crockery in the upper
basket.
If spoon handles do not fit between the
holders, then lay them the other way
round.
You can use the yellow slide to adjust
the height of the middle section of the
cutlery tray to make more room for
large items of cutlery, such as serving
spoons and ladles.