Filter
Top Products
Programme options
55
Memory
You can use the "Memory" option to
save the last programme selected.
Instead of the ECO programme, the last
programme selected will be selected
when the dishwasher is switched off
and back on again or the door is
opened and then closed at the end of a
programme.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the
button.
Keep the programme selector button
pressed in for at least four
seconds until the lower right hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
Press the button 6 times.
The indicator will flash rapidly 6
times at intervals.
The flashing sequence in the display
indicates whether the "Memory"
function is activated or not.
– : "Memory" is activated
– : "Memory" is switched off
Press the programme selector button
if you wish to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.