Filter
Top Products
Problem solving guide
67
Most minor faults in the performance of the appliance, some of which may result
from incorrect operation, can be put right without contacting the Service
Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances should only be carried out by a suitably
qualified and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.
Technical problems
Problem Cause and remedy
The dishwasher will not
start.
The door is not properly closed.
Push the door firmly shut.
The appliance is not plugged in.
Insert the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip switch in the mains fuse box or
replace the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher is not switched on.
Switch the dishwasher on with the button.
The dishwasher stops
during a programme.
The mains fuse has tripped.
Reset the trip switch in the mains fuse box or
replace the fuse in the plug (minimum fuse rating -
see data plate).
If the mains fuse trips again, call the Miele Service
Department.
After the programme
has started, the In-
operation indicator light
is not visible.
The reflector panel was not correctly fitted.
Re-fit the reflector panel correctly (see Installation
diagram).