Filter
Top Products
Problem solving guide
68
Problem Cause and remedy
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
All the programme
indicators flash when
the door is open.
Fault code shows in
the display.
There may be a technical fault.
Switch the dishwasher off with the button.
Switch the dishwasher back on after a few
seconds.
Select the programme you want.
Close the door.
If the indicator lights flash again, there is a technical
fault.
Call the Miele Service Department.
Fault :
The buzzer is sounding
continuously.
The drain pump may
also be running, even
with the door open.
The Waterproof system has reacted.
Close the stopcock.
Call the Miele Service Department.
Fault : A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the button.
Switch the dishwasher back on.
Select the programme you want.
Close the door.
If the fault message appears again, there is a
technical fault.
Call the Miele Service Department.