Filter
Top Products
Interrupting or re-starting a
programme
At any time you can .....
...interrupt a programme
^
Press the Stop/C button, or open the
appliance door.
The time stops counting down.
...continue a programme
^
Close the door and press Start.
The programme continues.
Altering the settings
If you discover after starting a
programme that....
...theMicrowave power level is too
high or too low, you can
^ select a new level.
...thetime set is too short or too long,
you can
^
interrupt the programme (press the
Stop/C button once), use the time
selector to set a new time and
continue the programme (press the
Start button),
or alternatively:
^
the cooking duration can be
increased by pressing the Start
button during operation. Each time
the Start button is pressed, the
cooking duration is increased by
another minute. (Exception: the
increased cooking time is in
increments of 30 seconds when the
microwave is being used on
maximum power.)
To cancel a programme
^
Press the Stop/C button twice.
At the end of a programme
An audible tone will sound when the
cooking programme is complete. The
oven interior lighting goes out.
The audible tone will sound briefly as a
reminder every 5 minutes for 20
minutes after the end of the
programme.
^
If you want to stop the audible tone,
press the Stop/C button. Automatic
warming function
Automatic warming function
The warming function will switch on
automatically at 80 W for a maximum of
15 minutes approx. 2 minutes after the
end of a cooking programme which has
used at least 450 W, providing the door
remains closed and no buttons are
pressed.
h,80WandH:H will light up in the
display.
Opening the door or operating one of
the buttons or selectors while the
warming function is in progress cancels
the function.
The warming function cannot be set as
a separate function.
Operation
23