Filter
Top Products
Tall unit
Building-in kit
The following items are supplied in the
accessory pack for installing the
appliance:
Installation
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
There are three spacers in the
accessory pack: one for the right-hand
side (R) and two for the left-hand side
(L), depending on whether the housing
unit wall is 16 or 19 mm thick.
^ Attach the correct left-hand spacer
applicable to the thickness of the
housing unit wall to one of the hooks
supplied.
^
Attach the other hook to the
right-hand spacer.
^
Before securing the hooks, make
sure that the screws are fitted where
the housing unit wall is at least 16
mm thick.
^
Draw a line on both sides of the
housing unit 420 mm above the floor
of the housing unit.
^
Position the lower edge of the spacer
on this line and align the stopper at
the front of the spacer with the front
of the housing unit side wall.
Installation
47