Filter
Top Products
One favourite programme can be
saved in memory. This programme can
be used for your most frequently
cooked recipe. This programme can
have up to 3 stages (e.g.: 2 minutes at
600 W, followed by 10 minutes at 450
W, and finally 3 minutes at 300 W).
Programming
(e.g. three step programme sequence)
^
First select the power level for the
first stage.
^
Then select the duration.
^ Press button M.
1 will light up in the display, and 2 will
flash.
^
Then select the second power level
and duration.
^
Press button M again.
2 will light up in the display, and 3 will
flash.
^
Then select the second power level
and duration. Press the M button.
After this third step, you can use the M
button to scroll through your entry and
check it.
^
When you have finished
programming, turn the power
selector to the 12 o'clock position.
^
Start the programme to save the
entry. Only ever run the entire
programme with food in the
appliance.
If there is no food in the appliance,
then press the Stop/C button twice
as soon as you have started it so
that the appliance is not damaged
by having no food in it.
1- and 2-stage programmes can be
saved in the same way: the
programming process is finished when
the programme selector is in the 12
o'clock position and the Start button
has been pressed, while pressing the
M button shows the next stage.
Changing an entry
^
Entering a new programme overrides
the previously saved programme.
Saving your favourite programme
30