^
To secure the spacers and hooks,
place a screw in one of the front two
holes and another in the middle of
the long hole at the back.
The long hole allows for adjustment if
necessary, and the two additional
holes are in case additional screws
are required.
^
Slide the appliance into the housing
unit, and pull the cable with the plug*
through the back of the unit.
* Plug shown is for illustration
purposes only.
^
Secure the appliance at the front by
lifting it over the hooks and lowering it
into position.
^
Check that the appliance is secure
by pushing lightly on the upper edge
of the front frame.
^ Check that it is correctly aligned.
^ Connect the appliance to the
electricity supply.
Installation
48