Filter
Top Products
36
OPERATING PROCEDURE PHOTOS
(7)Remove rivet E (one rivet) to detach the cover (See photo 10)
(8)Remove screw A (four screws) on inner wall and screw A (two
screws) at the front.
Detach three connectors and lift up the partition. (See photo 9)
(9)To detach connector cover, remove rivet E (two rivets each)
and catches (two places).
(See photo 10)
(10)Detach the connector.
(11)To detach fan grille, remove screw B (two screws) of right and
left side and remove upper catches (three places).
Fan grille consists of the following: motor dampers (for ice-
making compartment/ versa compartment, and freezer com-
partment), refrigerator fan motor, fan, thermal fuse, vegetable
compartment heater 1, four thermistors, vegetable compart
ment LED.
(See photo 10)
(12)To pull out defrost heater, remove the tape fixing lead wires
and push up the catches of evaporator support.
Remove heater roof out of defrost heater.
To detach drip tray, remove aluminum tape first.
(See figure 1)
(13)Cut the binder and disconnect the connector to remove the
DEF thermistor and the thermal fuse. (See photo 11)
Caution on assembly
Attach defrost heater in place and loosen the lead wires in
order to prevent water from entering the glass tube.
Attach the drip tray securely to the lower parts.
Attach the DEF thermistor in place. (If they are attached out of
place, thermal characteristics will go wrong.)
Attach the lead wires to the fixture.
Defrost thermistor (DEF thermistor)
Defrost heater , Drip tray
Fan grille
Connector cover (right/ left)
Partition V/ F
Cover (lower)
Photo 9
Photo 10
Fan grille
Screws A
Partition V/ F
Connector cover (left)
Catches
Connector cover (right)
Rivet E
Cover (lower)
Screws B
(Fan grille consists of the following: motor dampers (for ice
making compartment / versa compartment, and freezer
compartment), refrigerator fan motor, fan, thermal fuse, veg-
etable compartment heater 1 four thermistors, vegetable
compartment LED).
Fan grille
DEF thermistor
Evaporator
Defrost heater
Catch
Defrost
heater
Evaporator
support
Photo 11
Figure 1
w
Rivet E
Screws A
Connector
Rivet E
OA090-2.qxp 06.7.20 9:57 AM Page 36