Filter
Top Products
Chapter 3 – Using the Web Management Software
58 MultiModem rCell User Guide
2. To save the changes, click Submit.
3. On the PPP > Wakeup-on-Call screen, set up the following parameters:
Wakeup-on-Call Configuration
● Select Enable for Wakeup-on-Call.
● Set the Time Delay. You can use the 10 second default.
● Enter the Init Strings:
● To set Wakeup Init String 1 type AT+CLIP=1.
● To save settings, click Submit.
Caller ID Configuration
● To add a caller’s ID, to the Caller ID list, type that id.
● Click Add.
● To save each Caller ID as it is entered to the Caller ID list, click Add.
● To ensure your changes go into effect, click Save and Restart. The device saves all the settings and
reboots the computer.
PPP, Power-On Configuration Parameters
The Power-On Configuration feature allows you to set an initialization string that is sent to the router upon boot up.
Power-On Init String: You can enter a string of 0 to 40 characters that is sent to the router upon boot up. All
commands initializes before you proceed with regular PPP related activity.
Note: When no initialization string is configured, regular functions of the router is retained.
To save this setting click SUBMIT.
To ensure your changes go into effect, click Save and Restart.