Filter
Top Products
8
W415-0223 / E / 03.05.09
Positioning the logs improperly will cause fl ame impingement
and carboning.
PHAZER
TM
logs and glowing embers, exclusive to Napoleon
Fireplaces, glow when exposed to direct fl ame and provide
a unique and realistic glowing effect that is different in every
installation. Take the time to carefully position the glowing
embers for a maximum glowing effect. Use only certifi ed
PHAZER
TM
logs available from your Napoleon / Wolf Steel
Ltd. dealer.
1. Place the rear log (#1) onto the two log supports and against
the air intake pipe.
2. Position logs #2 and #3 against the grate posts and line up
the studs located on the burner with the holes on the bottom
of the logs. Keep slightly back of the front row of ports.
3. Fit the centre log (#4) into place behind log #3 and into the
pocket provided on the back log.
This can vary according to the mantle depth. Use the graph
to help evaluate the clearance needed.
4. Tear the glowing embers into pieces and place along the
front row of ports covering all of the burner area in front of the
logs. Care should be taken to shred the embers into thin, small
irregular pieces as only the exposed edges of the fi bre hairs
will glow. The ember material will only glow when exposed to
direct fl ame; however, care should be taken to not block the
burner ports. Blocked burner ports can cause an incorrect
fl ame pattern, carbon deposits and delayed ignition.
Log colours may vary. During the initial use of the fi replace,
the colours will become more uniform as colour pigments burn
in during the heat activated curing process.
FIGURE 17
0
34 7
8
9
11
13
12 56
7
10
12
H
E
I
G
H
T
M
A
N
T
L
E
MANTLE WIDTH
FIGURE 16
LOWER DOOR BRACKET
#3
#2
#1
FIGURE 12
FIGURE 13
FIGURE 14
#4
Place the door into the two lower door brackets, and secure
at the top of the unit with two #10-24 machine screws.
FIGURE 15
GLOWING EMBERS
Remove the backing of the logo supplied and place on the
glass viewing door, as indicated.
½”
½”
LOGO
LOG PLACEMENT DOOR INSTALLATION
MANTLE CLEARANCE
LOGO PLACEMENT
FIGURE 18
3”
6”
5”
4”
6” MANTEL
5”
3”
4”