Filter
Top Products
© National Instruments Corp. xi GPIB-ENET for Macintosh
About This Manual
This manual contains instructions for installing and configuring the National Instruments
GPIB-ENET and NI-488.2 software for Macintosh. This manual is meant to be used with
the NI-488.2 User Manual for Macintosh and the NI-488.2 Function Reference Manual
for Macintosh.
This manual assumes that you are familiar with the Macintosh and with Ethernet and
Internet networks, and that your Macintosh is connected to an Ethernet network. This
manual also assumes you have MacTCP installed on your Macintosh, which is required
before you can use the driver software for the GPIB-ENET. You must order the TCP/IP
Connection for Macintosh software separately from Apple Computer, Inc.
How to Use This Manual Set
NI-488.2 User
Manual for
Macintosh
Application
Development
and Examples
Getting Started
Manual
Novice
Users
Installation and
Configuration
NI-488.2 Function
Reference Manual
for Macintosh
Experienced
Users
Function
and Routine
Descriptions
Use this getting started manual to install and configure your GPIB hardware and
NI-488.2 software.