Filter
Top Products
Installation Verification and Troubleshooting Chapter 4
GPIB-ENET for Macintosh 4-4 © National Instruments Corp.
Step 3. Record Your Status Code Number
When you have computed your status code number, record it on the GPIB-ENET
Hardware and Software Configuration Form in Appendix C, Customer Communication,
before calling National Instruments.
Table 4-1 lists some examples of the long and short flashes and the status codes they
report.
Table 4-1. Sample READY LED Signals and the Corresponding Status Code Numbers
Number of
Long Flashes
Number of
Short Flashes
Corresponding
Status Code Number
1100
2110
5342
1807
3423
10 10 99
Common Questions
When should I use IBIC 488.2?
You can use IBIC 488.2 to practice communication with your instrument,
troubleshoot problems, and develop your application program. For more information
about IBIC 488.2, refer to Chapter 4, Interface Bus Interactive Control Utility, in the
NI-488.2 User Manual for Macintosh.
How do I use an NI-488.2 language interface?
For information about using NI-488.2 language interfaces, refer to the NI-488.2 User
Manual for Macintosh.
What do I do if the software verification test fails with an error?
Refer to the Troubleshooting Software Problems section of this chapter for information
about what might cause this test to fail.