Filter
Top Products
© National Instruments Corp. 1-1 GPIB-ENET for Macintosh
Chapter 1
Introduction
This chapter lists what you need to get started and optional equipment you can order,
gives instructions for inspecting your GPIB-ENET, and briefly describes the NI-488.2
software, the GPIB-ENET hardware, and its assigned Ethernet address.
What You Need to Get Started
One of the following boxes:
GPIB-ENET - 10Base-T Version (100 to 120 VAC)
GPIB-ENET - 10Base-T Version (220 to 240 VAC)
GPIB-ENET - Coax Version (100 to 120 VAC)
GPIB-ENET - Coax Version (220 to 240 VAC)
One of the following power cords:
U.S.A. standard power cord
Switzerland power cord
Australian power cord
Universal European power cord
North American power cord
U.K. power cord
3.5 in. NI-488.2 Software for Macintosh Distribution Disk
TCP/IP driver software installed
MacTCP-TCP/IP Driver Software