Oliveri 777-NT Kitchen Utensil User Manual


 
0777S20039 6-8
Remove the crumb tray from the slicer. Locate the adjustment nut at the lower end of
the motor mounting plate, see below. Turn the adjustment nut clockwise with a wrench
to increase tension on the drive belt. To reduce tension, turn the adjusting nut
counterclockwise. The drive belt should be just tight enough, using moderate finger
pressure, to allow a 3/8 inch deflection halfway between the motor drive pulley and the
driven pulley.
Replacing the Belt
Remove the infeed table, crumb chute, and discharge table. First remove the four black
knobs securing the tables, (see the illustration below). In addition to the knobs the