Filter
Top Products
Hotwire Menus and Screens
2-8
8000-A2-GB26-00
May 1998
The following figure illustrates the complete Monitoring menu hierarchy from the
Hotwire – DSL menu.
(A) Card Status
A. Card Info
B. Login History
C. Syslog
(B) Physical Layer
A. Active List
B. Ethernet Stats
C. EtherHDLC Stats
D. DSL Link Perf
E. DSL Perf Stats
F. DSL Error Stats
G. DSL Xmit Stats
(C) Interfaces
A. Active List
B. Status
(D) Network Protocol
A. Socket Statistics
B. UDP Statistics
C. TCP Statistics
D. IP Statistics
E. ICMP Statistics
F. SNMP Statistics
(E) Bridge
A. Bridge Table
B. MAC Table
C. Client
D. VLAN
E. ARP Table
98-15900
Monitoring
A. Card Status
B. Physical Layer
C. Interfaces
D. Network Protocol
E. Bridge
F. SN Information
(F) SN Information
A. SN Information
Logging In to the System
This section describes how to log in to the Hotwire DSLAM system after the
system has been configured for the first time.
NOTE:
When you power on the system for the first time, the system displays the
Who Am I screen. This screen can be accessed only from the local console.
For information about this screen, see
Accessing the System for the First
Time
in Chapter 3,
Initial Setup Instructions
.