Filter
Top Products
Initial Setup Instructions
3-2
8000-A2-GB26-00
May 1998
" Procedure
To set the management IP address and subnet mask from the console terminal:
1. Power up the chassis.
After the self-test completes, the Who Am I screen appears.
2. From the Who Am I screen, enter the management domain IP address of the
MCC card and press Return. For example, if the IP address of the MCC card
is 198.152.110.1, type this value at the (nnn.nnn.nnn.nnn): prompt on
the Input Line at the bottom of the screen.
The system automatically calculates the subnet mask based on the IP
address you enter.