Filter
Top Products
Monitoring the Hotwire DSLAM
6-17
8000-A2-GB26-00
May 1998
Table 6-5. Bridge Options (1 of 2)
Bridge Table B-E-A
Displays information on various bridge functions.
Item – Enter the item number you wish to display from one to 16.
VLAN – VLAN ID between two and 4094 (Default = Null).
Mux Fwd – Enable/Disable.
IP Filter – Enable/Disable.
IP Scoping – Enable/Disable.
Domain Name – Domain name of the card. There can be up to 12 VLAN addresses at a
time, with a maximum of 30 characters each.
MAC Table B-E-B
Displays the MAC table.
Bridge – lb0 (Equivalent to e1a). Name of the logical bridge.
Entry # – Enter the MAC table entry number you wish to view.
Entries – Number of entries in the MAC table.
Bridge Timer – Timer that is used to show dynamic MAC addresses.
# – Entry number.
MAC Address – MAC address in
xx.xx.xx.xx.xx.xx
format.
VLAN ID – VLAN ID associated with the MAC address.
Age (Secs)– Age in seconds since the address was last used.
Intf – Interface behind which the network element associated with the MAC address lies.
Flags – Dynamic = MAC addresses that are determined via DHCP. Perm (DHCP) =
MAC addresses are determined by the lease time. Entries in the MAC table will be
removed when the lease time expires.