Filter
Top Products
C1547M (7/03) 5
9. Upgrade the CC1 system software executable file, CM9740.EXE:
a. Insert the System 9740 Operation Disk, Version 8.03.012, into the disk drive of the CC1.
b. Copy the CM9740.EXE executable file from the 9740 directory on the Operation Disk to the C:\9740 directory of the
CC1. At the C:\9740 prompt, enter:
copy a:\9740\cm9740.exe
10. Copy all configuration files saved to the floppy disk in step 7 above to the C:\9740 directory of the CC1. (Be careful that
you do not copy the configuration files saved to the floppy disk in step 4c above.)
At the C:\9740 prompt, enter:
copy a:filename.*
where
filename
is the name of the configuration file. For example, if the file name is test, enter the following:
copy a:test.*
CAUTION: If you need to modify the configuration files in the future, do not use the SET97XX program. Doing so
will corrupt the configuration files. When configuration files have been upgraded to version 8.03.012 in the
System Manager database (as was performed in step 6 above) and the upgraded files have been copied to the CC1, you
must use the System Manager program on the external PC to modify the files.
11. Press Ctrl+Alt+Del to reboot the 9740 system.
12. Verify that the system is operating properly.
13. Delete the old configuration files from the floppy disk that was used in step 4c above, or save the old configuration files
that are on the floppy disk as a backup of the earlier version. If you choose to save the old configuration files that are on
the floppy disk, be careful that you do not mistakenly copy the files back into the CC1 at a future time.