Filter
Top Products
16 EN
3 Use a cleaning pad to remove the
residue from the lower part of the
head unit, overÁ ow sensor, and the
blade.
4 Use a dry cloth to clean the head
unit handle, control panel, upper
plug, upper plug connector, base, and
power cord connector.
5 The outside of the chamber can be
cleaned with a damp cloth.
Easy clean
• After processing is complete, if you
cannot promptly clean the residue on
the appliance, the residue will dry up
and stick on the appliance, difÀ cult to
remove. As this happens, you can use
the easy clean function to heat and
soak the inner side of the chamber
and clean the appliance easier.
7 Cleaning
Note
• Disconnect the power and remove
the power cord before cleaning or
disassembling this appliance.
• Do not put the head unit in water.
• To prevent scalding, do not touch the
head unit, perforated Á ow cup, or the
inner side of the chamber before they
cool down.
1 After disconnecting the power, lift
the head unit, rinse the lower part of
the head unit, overÁ ow sensor, blade,
perforated Á ow cup, and inner side of
the chamber.
2 After the head unit cools down,
remove the perforated Á ow cup.
Rotate the perforated Á ow cup and
remove it, as shown in the illustration.
Take care of the sharp blade.