Filter
Top Products
using your microwave oven _43
Your oven allows you to set three different cooking stages, each with their own time length and
power level. The power level lets you control the heating intensity from Warm (1) through to High
(0).
1. Follow steps 1 and 2 in the “One-Stage Cooking” section on the previous page. The display
shows : THE FIRST STAGE COMPLETED. PRESS START OR SET THE NEXT STAGE
OF MICROWAVE, CONVECTION, BROWN OR COMBI
When entering more than one cooking stage, the Power Level button must be pressed
before the second cooking stage can be entered.To set the power level at High for a stage of
cooking, press the Power Level button twice.
2. Press the Microwave button.
3. Use the Number buttons to set a second cooking time.
4. Press the Power Level button, then use the number buttons to set the power level of
the second stage of cooking. The display shows the power level you have set and then
“THE SECOND STAGE COMPLETED. PRESS START OR SET THE NEXT STAGE OF
MICROWAVE, CONVECTION, BROWN OR COMBI”
5. Press Start button to begin cooking, or repeat steps 2, 3 and 4 to set a cooking time and
power level for a third stage of cooking. When finished, press Start button.
For convection cooking, it is recommended that you preheat the oven to the appropriate temperature
before placing the food in the oven. When the oven reaches the requested temperature, it is maintained for
approximately 10 minutes; it is then switched off automatically.
1. Press the Preheat button.The display shows: ENTER DESIRED TEMP WITH NUMERIC
BUTTON.
2. Use the Number buttons to set a Temp up to 400°F. (100°F ~ 450°F Temp control.)
3. Press the Start button.When the oven reaches the desired temperature, it will chime and
the display shows “PREHEAT DONE, PLACE FOOD IN OVEN”. When the oven beeps, place
the food inside and follow the directions “ convection baking”, “combination cooking”, or
“Browning”.
• Do not put food in the oven during preheating.
• When cavity inside Temperature is controlled, noise is produced.
This uses secure because it is relay control noise (Convection, Combi, Brown, Preheat,
Warm).
SMK9175ST_XAA-03482J-02_EN.indd 43 2009-09-04 7:06:37