Filter
Top Products
Water System Operation:
The water system consists of a float valve and
reservoir. The water level in the reservoir tank is
the same level as that inside the evaporator.
Building water supply flows to the float valve and
the float valve opens to add water to the reservoir
as water flows out to the evaporator.
Inside the evaporator there is a water seal. This
seal is the type that has a rotating half and a
stationary half. The area where the two seals
touch are smooth flat surfaces. When the auger is
installed in the evaporator, it forces the rotating
half of the seal against the stationary half. The
stationary half is spring-loaded and provides a firm
pressure against the auger portion of the seal.
.
Reservoir
Float
Water Inlet
Water Line
Bin Drain
Evaporator
Reservoir Overflow
Gear Reducer
Ice Tube
Bin
Thermostat
Bracket
Ice
Clamp
Spout
Water System Schematic
Grommet
AFE325
August 1994
Page 10