Filter
Top Products
For The Plumber
Drains: The ice maker requires a gravity drain for
the reservoir overflow and bin drain. The pitch on
the drain tubes must be at least 1/4 inch fall per
foot of horizontal run. On long horizontal runs, a
vent at the back of the cabinet will improve
draining, and is recommended.
Water supply:
Connect cold, potable water to the machine. A
hand valve near the location is recommended. A
water filter is also a good idea.
Follow all local codes.
There are two drains and one water inlet
connection to make.
The drains are: a copper bin drain tube; and a
rubber reservoir overflow tube.
The water inlet connection is a 3/8" male flare.
Route a drain line to the reservoir overflow drain
hose. Route a separate drain to the bin drain tube.
Route the inlet water line to the fitting on the
corner post.
Water Inlet
3/8" Male Flare
Drain
7
⁄
16
" I.D. Flexible Hose
AFE325
January 2005
Page 4