Filter
Top Products
7
A46951, SCA/SCNZ R990K(S)/(W) O/M
* This oven is preset with the INFORMATION GUIDE ON.
To assist you in programming your oven, the information guide will appear in the display.
In this manual, the display of information guide is abbreviated.
* When you become familiar with your oven, the information guide can be turned off. Check page 22.
Step
Procedure Pad Order Display
Plug the oven into a power point and switch
on the power.
Ensure the oven door is closed.
Press the STOP/CLEAR pad so that the
oven beeps.
1
BEFORE OPERATING
Getting Started
2
Only the dots will remain.
11 43
Step
Procedure
Press the CLOCK pad.
Enter the correct time of day by pressing the
numbers in sequence.
* To enter the present time of day 11:34 (AM or PM).
(operation guide off:
)
The dots (:) will flash on and
off.
Press the CLOCK pad again.
2
1
3
Clock Setting
Pad Order Display
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45) ERROR will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking, auto start or timer mode, press the CLOCK pad. As long
as your finger is pressing the CLOCK pad, the time of day will be displayed.
Press the STOP/CLEAR pad twice.
Stop/Clear
Use the STOP/CLEAR pad to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
CLOCK
CLOCK
STOP
CLEAR
SCA/SCNZ R990K 1-13 05.9.1, 3:54 PM7