Filter
Top Products
Configuring Switching
23
SonicOS 5.7: Advanced Switching Feature Guide and Screencast Tutorial
Creating a Logical Link
To create a Logical Link, perform the following steps:
Step 1 On the Switching > Link Aggregation page, click the Add button.
Step 2 In the Add LAG Port window, select the interface from the Port drop-down list.
Step 3 To specify a key, clear the Auto-Detect checkbox and type the desired key into the Key field.
Step 4 If this interface will be the aggregator for the Logical Link, select the Aggregator checkbox. Only one
interface can be an aggregator for a Logical Link.
Step 5 To enable LACP, select the LACP Enable checkbox. Dynamic Link Aggregation is supported with the use
of LACP. The link partner is discovered via LACP messages.
Step 6 Click OK.
Step 7 On the Switching > Link Aggregation page, click the Add button again.